Mechanical equipment

DRYER

  • Italian manufacture Dryer.
  • Surface: 14,10 sq.m.
  • Funnel: 25 sq.m.
  • Power: 46,7 KW
  • Possibilities: 600 tonne capacity in 24 hours with the mechanical equipment and electrical operation control panel.

MECHANICAL EQUIPMENT WITH GRAIN STORAGE GROUP TECHNICAL DESCRIPTION

TEMPERING SILO FOR LIQUID PRODUCT

  • Heavy industrial type
  • Capacity 110Τ
  • Diameter d5,35m.
  • Side height 6,90m.
  • The side walls are made of hot-galvanised corrugated high-strength steel sheet. The roof consists of galvanised steel sheets with supports that ensure high rigidity and special form connections for tightness.

Supplied complete with:

  • Tight entrance products
  • Support for thermometric installation.
  • Manhole on the roof.
  • Vertical external galvanised supports with anchor system in the perimeter ring.
  • Two lateral inspection chambers with tight lid.

METAL PERFORATED CONE

Extraction and ventilation for the aforementioned tempering silo and metal support frame, mounted inside the silo.

2 STORAGE SILOS

  • Heavy industrial type.
  • Capacity 1.500Τ each, i.e in total 3.000Τ (s.w 0,75).
  • Diameter d12,25m.
  • Side height 16,05m and a flat concrete base.
  • The sidewalls are made of hot-galvanised corrugated high-strength steel sheet. The roof consists of galvanised steel sheets with supports, ensuring high rigidity and a special form connections for complete tightening.

Supplied complete with:

  • Tight entrance products.
  • Support for thermometric installation.
  • Manhole on the roof.
  • Vertical external galvanised supports with anchor system in the perimeter ring.
  • 1 side access door with tight lid.

1 PERFORATED GRID SET

To cover the ventilation ducts in the floor of the two silos, of a total length of 90m and air input devices.

1 GATEWAY

  • Width 1,40m.
  • Length 28,00m.
  • Non slip floor.
  • Safety rails.
  • Fully hot galvanised.

1 ARMOUR FACED CONVEYOR (SUPPLY)

  • Supply the storage silo.
  • Τype TC300GP.
  • Fully hot dip galvanised.
  • Length 25,70m.
  • Performance 100Τ/hour (s.w. 0,75).
  • Gearmotor 7,5KW.

1 ARMOUR FACED CONVEYOR (RECEIPT)

  • For receipt from the storage silo.
  • Τype TC300GP.
  • Fully hot dip galvanised.
  • Lenght 22,80μ.
  • Performance 100Τ/hour (s.w. 0,75).
  • Motor power 7,5KW.

1 BUCKET LIFT

  • Type EG10.
  • For supplying and receiving in the storage silo.
  • Fully hot dip galvanised.
  • Height 27,00m.
  • Performance 100Τ/hour (s.w 0,75).
  • Gearmotor 15KW.

1 LIFT HEAD PLATFORM

Giving access to the gearmotor and the head, with non-slip flooring, safety rails and supports.

1 SCREW FOR RECEIPT

  • Receipt of liquid from the silo.
  • Diameter 200.
  • Length 5,50μ.
  • Motor 3KW.

1 MOBILE DISCHARGE SCREW

  • Type VRA 30.
  • Motor 3KW.

1 RAPID LOADING SILO FOR TRUCKS

  • Capacity 35Τ.
  • Square section 4χ4m.
  • Hot dip galvanised.

ONE METAL SUPPORT FRAME

With control platform for the rapid loading silo.

1 ROTARY WIPER

  • Type Ε 703L.
  • Consisting of a rotating cyclinder.
  • Diameter 750.
  • Length 3,00m.
  • Three perforated grids of 1,00m each. The clean fruits comes out of the grids and on the other side of the cyclinder come out the thick impurities.
  • The rotation of the cylinder is achieved by means of 0.75 KW gearmotor.

2 FANS

1 1 KW power for ventilation of storage silos.

1 EXTRA FAN

5.5 KW power to aerate the liquid product tampering silo.

1 PIPE SET

  • Diameter 195.
  • Length 45m.
  • For connecting the different machines together.
  • Complete with curved joints.
  • Elbows.
  • Supports.
  • Inlets-Output.
  • Discharge and filler ports.
  • Manifold.
  • Other components.

1 STAIR SET

  • Length 45m.
  • Access to the various parts of the complex.
  • Complete with protective washers.
  • Supports as well as access LOFTS.
  • Non slip floor.
  • Safety rails.

THERMOMETER SYSTEM

For the crop inside the silo, consisting of a main cable per silo, with five checkpoints on the storage silos and 3 checkpoints in the tempering silo and a portable electronic board showing temperatures with connexion to the electrical panel.

ELECTRICAL PANEL

  • For the handling of each motor of the installation.
  • For the control of each motor of the installation.
  • For the protection of each motor of the installation.
  • Operating diagram.
  • Terminal security in armoured face conveyors.
  • Upper level gauges in storage, tempering and loading silos.